Whether it is in the enterprise factory or in the personal garage, can be applied to the fire shutter door, in order to meet the user's higher demand, the safety measures of the rolling shutter door are also gradually improved. Rolling shutter door is generally customized, before the customization, there will be a special person to measure the use place of the rolling shutter door. Below, Jinan fire shutter door manufacturer Baiteng takes you to understand the points needing attention when measuring the rolling shutter door, hoping to help you!

1.頂墻直角

1. Right angle of top wall

測量者應主動征求客戶的意見。，顧客選擇保留統一美觀的線條，測量器可將目標尺寸縮小(縮短)60毫米，達到目的;其次，客戶選擇的目標尺寸保持不變，安裝人員在安裝過程中盡可能小地進行切割。

The surveyor should take the initiative to solicit the opinions of customers. First of all, the customer chooses to keep the uniform and beautiful lines, and the measuring instrument can reduce (shorten) the target size by 60 mm to achieve the purpose; secondly, the target size selected by the customer remains unchanged, and the installation personnel cut as little as possible during the installation process.

2.單直角墻

2. Single right angle wall

測量者應該主動征求顧客的意見。結果如下：一是客戶選擇左右保留線條，統一美觀，測量者和客戶表示目標尺寸減少了60毫米，從而實現了保持線條的愿望。

The surveyor should take the initiative to solicit the opinions of customers. The results are as follows: first, the customer chose to keep the left and right lines, which were unified and beautiful. The surveyor and the customer said that the target size was reduced by 60mm, thus realizing the desire to keep the line.

二是客戶選擇的目標尺寸不變(客戶要求門扇稍大)，有必要向客戶解釋清楚，直角墻框架邊緣線應安裝并切割，直到合適為止(效果是線左右不對稱)。

Second, the target size selected by the customer remains unchanged (the customer requires a slightly larger door leaf). It is necessary to explain clearly to the customer that the edge line of the right angle wall frame should be installed and cut until it is suitable (the effect is that the line is asymmetric from left to right).

3.雙面直角墻

3. Double sided right angle wall

濟南防火卷簾門廠家建議調查員應主動征求濟南卷簾門客戶的意見。結果如下：一是顧客選擇左右保留線條，統一美觀，測量員可以將目標尺寸縮小120毫米，達到目的;其次，客戶選擇的目標尺寸保持不變，安裝人員將雙面直角墻附近的線向右切割。

Jinan fire shutter manufacturers suggest that investigators should take the initiative to solicit opinions from customers of Jinan rolling shutter doors. The results are as follows: first, customers choose to keep the left and right lines, unified and beautiful, the surveyor can reduce the target size by 120 mm to achieve the purpose; secondly, the target size selected by the customer remains unchanged, and the installation personnel cut the line near the double-sided right angle wall to the right.

4.地面

4. Ground

由于客戶的實際情況差異很大，通常分為兩類：

Because the actual situation of customers is very different, it is usually divided into two categories:

一是地板已經鋪好，可以用上述測量方法測量;

One is that the floor has been paved and can be measured by the above measurement method;

二是未鋪砌，高度應降低：1.地磚：大理石和瓷磚減少50毫米;2.鋪木地板、復合地板、實木地板統一減少30毫米;3.骨架木地板以骨架和實際地板厚度增加10毫米為準。

The second is not paved, the height should be reduced: 1. Floor tile: marble and ceramic tile reduced by 50 mm; 2. Flooring, composite floor, solid wood floor unified reduced by 30 mm; 3. Skeleton wood floor with skeleton and actual floor thickness increased by 10 mm.

5.左右墻和頂墻的垂直度和傾斜度。測量者應注意選擇大點作為目標尺寸。

5. Verticality and inclination of left and right walls and top walls. The surveyor should pay attention to select the largest point as the target size.

濟南防火卷簾門

Jinan fire shutter door

以上就是濟南防火卷簾門廠家介紹的關于卷簾門測量時應該注意的五點，大家都清楚了嗎?希望這些內容能幫助到大家。如果想要了解更多的相關資訊，可以關注我們的網站，也可以和我們聯系!

The above is Jinan fire shutter door manufacturers on the rolling shutter door measurement should pay attention to the five points, we are clear? Hope these contents can help you. If you want to know more about it, you can pay attention to our website or contact us!